Return to: U of M Home

Publications

Recent Publications

M.P. Hallberg and P.J. Strykowski, "Open-loop control of fully nonlinear self-excited oscillations," Physics of Fluids, Vol. 20, 2008, 041703.

A.A. Behrens and P.J. Strykowski, “Controlling volumetric heat release rates in a dump combustor using countercurrent shear,” AIAA Journal, Vol. 45, No. 6, 2007, pp. 1317-1323.

M.P. Hallberg, V. Srinivasan, P. Gorse, and P.J. Strykowski, “Suppression of global modes in low-density axisymmetric jets using coflow,” Physics of Fluids, Vol. 19, 2007, 014102-1-10.

R.D. Gillgrist, D.J. Forliti, and P.J. Strykowski, “On the mechanisms affecting fluidic vectoring using suction,” J. Fluids Engineering, Vol. 129, No. 1, 2007, pp. 91-99.

J.M. Lutz, A.B. Hoxie, and P.J. Strykowski, “Performance of suction-based counterflow in reacting step geometries,” Proceedings 20th Propulsion Conference, Alexandria, VA, Dec. 12-14, 2007.

D. Outcalt, M. Hallberg, G. Yang, J. Heberlein, P. Strykowski, and E. Pfender, “Diagnostics and control of instabilities in a plasma spray torch,” 18th International Symposium on Plasma Chemistry, Kyoto, Japan, Aug. 26-31, 2007.

M.P. Hallberg and P.J. Strykowski, “On the universality of global modes in low-density jets,” J. Fluid Mechanics, Vol. 569, 2006, pp. 493-507.

D.J. Forliti, A.A. Behrens, B.A. Tang, and P.J. Strykowski, “Prevaporized JP-10 combustion and the enhanced production of turbulence using countercurrent shear,” Combustion Processes in Propulsion, Chapter 8, Elsevier Press, 2006, pp. 75-86.

A.A. Behrens, J.M. Lutz, and P.J. Strykowski, “Instantaneous flame anchor measurements behind bluff bodies,” Proceedings 19th Propulsion Conference, Costa Mesa, CA, Dec. 18-20, 2006.

M.P. Hallberg and P.J. Strykowski, “Stability and control of very low density axisymmetric jets,” 3rd AIAA Flow Control Conference, paper AIAA-2006-3704, San Francisco, CA, 5-8 June 2006.

J. Heberlein, J.P. Trelles, D. Outcalt, M. Hallberg, P. Strykowski and E. Pfender, “Control of fluid dynamic instabilities in plasma torches – key to reproducible atmospheric pressure plasma spray coatings,” 9th Materials Science Workshop, Technical University Chemnitz, Chemnitz, Germany, Sept. 7 and 8, 2006, Proceedings pp. 257-262.

D. Dores, M. Madruga Santos, A., Krothapalli, L. Lourenco, E. Collins Jr., F. Alvi, and P.J. Strykowski, “Characterization of a counterflow thrust vectoring scheme on a gas turbine engine exhaust jet,” 3rd AIAA Flow Control Conference, paper AIAA-2006-3516, San Francisco, CA, 5-8 June 2006.

D. Outcalt, M. Hallberg, G. Yang, J. Heberlein, E. Pfender, P. Strykowski, “Instabilities in plasma spray jets,” International Thermal Spray Conference, Seattle, WA, 15-18 May 2006.

R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F. Kulacki, U. Kortshagen, S. Garrick, and V. Srinivasan, “Heat transfer - A review of 2003 literature,” Intl. J. Heat & Mass Trans., Vol. 49, No. 3-4, 2006, pp. 451-534.

D.J. Forliti, B.A. Tang, and P.J. Strykowski, “An experimental investigation of planar countercurrent turbulent shear layers,” J. Fluid Mechanics, Vol. 530, 2005, pp. 241-264.

D.J. Forliti and P.J. Strykowski, “Controlling turbulence in a rearward-facing combustor using countercurrent shear,” J. Fluids Engineering, Vol. 127, May 2005, pp. 438-448.

A.A. Behrens, M.P. Hallberg, D.J. Forliti, and P.J. Strykowski, “Combustion control of premixed & prevaporized JP-10 in air downstream of a backward-facing step using steady counterflow,” Advances in Combustion & Noise Control, Chapter 7, Cranfield University Press, 2005, pp. 99-114.

D.J. Forliti, A.A. Behrens, P.J. Strykowski, and B.A. Tang, “Enhancing combustion in a dump combustor using countercurrent shear. Part I: nonreacting flow control and preliminary combustion results,” Proceedings ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-81267, Orlando, FL., 5-11 Nov. 2005.

A.A. Behrens, M.J. Anderson, P.J. Strykowski, and D.J. Forliti, “Enhancing combustion in a dump combustor using countercurrent shear. Part II: heat release rate measurements and geometry effects,” Proceedings ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-81274, Orlando, FL., 5-11 Nov. 2005.

J. Heberlein, D. Outcalt, M. Hallberg, G. Yang, P. Strykowski, E. Pfender, “Fluid dynamic stability of plasma spray jets,” International Thermal Spray Conference and Exposition, Basil, Switzerland, 2-4 May 2005.

A.A. Behrens, M.J. Anderson, and P.J. Strykowski, “PIV measurements in a premixed JP10/air dump combustor: role of counterflow on turbulence and heat release,” Proceedings 18th Propulsion Conference, Monterey, CA, Aug. 24-26, 2005, pp. 143-148.

A.A. Behrens, M.J. Anderson, D.J. Forliti, and P.J. Strykowski, “The role of enhanced recirculation in controlling turbulent combustion and flame anchoring in a step combustor,” Proceedings of 17th Propulsion Conference, Cambridge, MA, June 16-18, 2004, pp. 27-32.

E.G. Collins, Jr., Y. Zhao, F. Alvi, M. Alidu, and P.J. Strykowski, “Feedback control for counterflow thrust vectoring,” Proceedings of the American Control Conference, Vol. 4, 2004, pp. 3654-3659.

D.J. Forliti, A.A. Behrens, and P.J. Strykowski, “Combustion control in a dump combustor using countercurrent shear,” Proceedings International Colloquium on Combustion and Noise Control, Ed. G. Roy, 12-15 August 2003, Cranfield, England, pp. 140-146.

T. Witkowski, S. White, C. Ortiz Duenas, P. Strykowski, and T. Simon, “Characterizing the performance of the SR-30 turbojet engine,” Proceedings of the 2003 ASEE Conference & Exposition, paper 2003-1397, Nashville, TN. 22-25 June 2003.

A.A. Behrens, M.P. Hallberg, D.J. Forliti, and P.J. Strykowski, “Control of a backward-facing step combustor employing suction at the dump plane,” Proceedings of 16th Propulsion Conference, Los Angeles, CA, 9-11 June 2003, pp. 208-213.