Kulacki: Publications

Publications

General Professional Articles & Management of Technology

1. Kulacki, F. A., Crossman, G.R., and Tang, C. A., 1998, “Life-Long Learning for Mechanical Engineers: Broadening the Base and Adapting to Change,” Report of the Task Force on Life Long Learning, Board on Engineering Education, American Society of Mechanical Engineers (ASME internal paper submitted to the Board of Governors, November 1998).

2. Kulacki, F. A., 1999, “The Future of Callings: Engineering, Engineers, and the Public Good”, William Mitchell La Review, William Mitchell College of Law, Vol. 25, pp. 157-179.

3. Shabayek, A.A.E., and Kulacki, F.A., 1999, “The US-Japan Industry and Technology Management Training Program: A new model for transnational collaboration and education for high-technology business,” International Journal of Continuing Engineering Education and Life-long Learning, Vol. 9, pp. 45-52.

4. Lenz, J., van Wyk, R., and Kulacki, F. A., 2003, “MOT as a Discipline: Technical Analysis as a Foundation”, Proceedings, Annual Conference, International Association for the Management of Technology (IAMOT), Paper No. 4-104, Orlando, April 2003.

5. Lenz, J., Kulacki, F. A., and van Wyk, R., 2004, “Teaching Entrepreneurship - The Capston Project”, Proceedings, 13th International Converence on Management of Technology, Washington, April.

6. Shabayek, A.A., Wan, K. M. S., and Kulacki, F. A., 2005, “Value Added for Enhancing Productivity and Improvement in Technology Management: A Case Study of Hong Kong Enterprise”, Proceedings, 14th International Conference on Management of Technology, Khalil, T., Ed., International Association for the Management of Technology, Miami.

Texts and Other Educational Materials

1. Kulacki, F. A., 2002, Visual Aids for Instruction of Thermodynamics, McGraw-Hill Primus Publishers, New York. (An Internet delivered set of notes for instruction of the undergraduate thermodynamics.)

2. Kulacki, F. A., 2002, “Heat Transfer and Fluid Mechanics: A First Course,” an audio enhanced undergraduate course for the College of Continuing Education, 2002; CD-ROM, College of Continuing Education, University of Minnesota, September 2002.

Engineering Education

1. Zimmerman, J.R., Kumar, A., and Kulacki, F.A., 1984, “Transition and Change in Mechanical Engineering Education at the University of Delaware -The Impact of Computer-Aided Engineering,” Proceedings, Annual Conference, American Society for Engineering Education, Vol. II, pp. 793-802.

2. Kulacki, F.A., Zimmerman, J.R., and Kumar, A., 1984, “Alternative Computer Strategies in Mechanical Engineering, Proceedings, Frontiers in Education Conference, American Society for Engineering Education.

3. Zimmerman, J. R., Billingsley, J.G.S., and Kulacki, F.A., 1986, “The Case Study Approach in the Capstone Design Course,” Proceedings, Annual Conference, American Society for Engineering Education, Biedenbach, J. M., et al., Eds., pp. 638-644.

4. Kulacki, F.A., and Bennett, J. S., 1987, “Honors Research for Engineering Students-A Program Progress Report,” Proceedings, Annual Conference, American Society for Engineering Education, Grayson, L. P., and Biedenbach, Eds., Vol. 4, pp. 2020-2035.

5. Kulacki, F.A., and Vlachos, E., 1992, “Downsizing the Engineering Curriculum, Part I: Contextual Basis for Action,” Proceedings, Engineering Foundation Conference on Innovations in Engineering Education, Carmi, S., et al., Eds., Engineering Foundation, New York, pp. 87-103.

6. Kulacki, F.A., and Vlachos, E., 1992, “Downsizing the Engineering Curriculum, Part II: Toward a Reduced Baccalaureate Program,” Proceedings, Engineering Foundation Conference on Innovations in Engineering Education, Carmi, S., et al., Eds., Engineering Foundation, New York, pp. 105-114.

7. Kulacki, F.A., and Vlachos, E. C., 1995, “Downsizing the Curriculum: A Proposed Baccalaureate Program and Contextual Basis,” Journal of Engineering Education, Vol. 84, No. 3, pp. 225-234.

8. Edwards, H. W., Hendricks, D. W., Kulacki, F.A., Loftis, J. C., Murphy, V. G., Sanders, T. G., Walters, R. W., and Ward, R. C., 1992, “Environmental Education in Engineering: A New Paradigm for the 1990s” Proceedings, Water Resources and Environmental Education, Training and Research, Grigg, N. S., Ed., Department of Civil Engineering, Colorado State University.

9. Kulacki, F.A., and Vlachos, E. C., 1993, “Downsizing the Mechanical Engineering Curriculum: A Paradigm Shift for the 21st Century,” Proceedings, ASME/AIChE National Heat Transfer Conference, American Society of Mechanical Engineers, New York.

10. Kulacki, F.A., 1993, “Engineering Education on the Verge of the 21st Century: The Transforming Context,” Minnesota Technolog, Fall (invited article).

11. Kulacki, F.A., Vlachos, E. C, and Johnson, G. R., 1995, “The Engineering Curriculum: The Contextual Basis for Reform in the Information Age,” The Influence of Technology on Engineering Education, Bourne, J., Broderson, A., and Dawant, M., Eds., CRC Press, Boca Raton, pp. 17-35.

12. Rathbone, D. E., Hinton, J. D., Hoadley, P. G., Kersich, A. T., Kulacki, F. A., LeFevre, E. W., Locke, C. E., McClure, R. W., Smerdon, E. T., and Steadman, J. W., 1995, “Proposed National Model for Engineering Licensing and Registration,” Proceedings, 4th World Conference on Engineering Education, Krueger, E. R., and Kulacki, F.A., Eds., Technology-Based Engineering Education Consortium, William C. Norris Institute, Bloomington, Vol. 1, pp. 130-135.

13. Kulacki, F. A., 1996, “The Education of Mechanical Engineers for the 21st Century,” Proceedings, 73rd Spring Annual Meeting, The Japan Society of Mechanical Engineers, Tokyo, Vol. 4, pp. 171-181; also, JSME International Journal, Japan Society of Mechanical Engineers, Tokyo, Series A, Vol. 39, No. 4.

14. Clarke, R. W., and Kulacki, F. A., 1997, “International Engineering: Things Your Engineering School Never Told You,” Proceedings, Conference on Mechanical Engineering Education for Global Practice, American Society of Mechanical Engineers, New York.

15. Aichlmayr, H. T., and Kulacki, F. A., 1997, “Toward a Universal Structure for the Implementation of Technology in Engineering Education,” Proceedings, Ninth Annual Conference, Technology-Based Engineering Education Consortium, Basu, P. K., Siller, T. J., and Kulacki, F., Eds., William C. Norris Institute, Bloomington.

16. Sanchez, J., Kulacki, F. A., and Aichlmayr, H. T., 1997, “Development of a Student-Centered Tool Kit for Engineering Thermodynamics,” Proceedings, Ninth Annual Conference, Technology-Based Engineering Education Consortium, Basu, P. K., Siller, T. J., and Kulacki, F. A. , Eds., William C. Norris Institute, Bloomington.

17. Arora, S., and Kulacki, F. A., 1997, “Challenges to Exploit the Internet for Engineering Education,” Proceedings, Ninth Annual Conference, Technology-Based Engineering Education Consortium, Basu, P. K., Siller, T. J., and Kulacki, F. A., Eds., William C. Norris Institute, Bloomington.

18. Kulacki, F. A,, and Krueger, E. R., 1998, “International Trends in Engineering Education”, Proceedings, International Conference on Engineering Education, Scvarda, L. C., Eds., Pontifical Catholic University, Rio De Janeiro, Brazil (CD ROM Format).

19. Aichlmayr, H. T., Kulacki, F. A., Strykowski, P. J., and Simon, T. W., 1999, “Technology-Based Educational Tools for Teaching Heat Transfer, Thermodynamics and Fluid Mechanics: A Status Report”, ASME/JSME Joint Thermal Engineering Conference, Paper No. AJTE-6299 (CD ROM Format), American Society of Mechanical Engineers, New York.

20. Kohl, M., Aichlmayr, H. T., and Kulacki, F.A. 2000, "A Critical Review of Software for Technology-Based Education in the Thermal and Fluids Engineering,” Proceedings, ASEE 2000: Teaching and Learning in the 21-st Century," Smith, K. and Kulacki, F. A., Eds., (CD ROM Format).

21. Kulacki, F. A., Swope, J. S., Oberg, L. J., Reardon, R., Ballard, J. K., and Anderson, C. V., 2001, “An On Line Course in Heat Transfer and Fluid Mechanics: The Developmental Process, Proceedings”, ASEE North Midwest Section Annual Conference, University of North Dakota, September 28-30.

22. Kulacki, F. A., Sakamoto, H., and Swope, J. S., 2002, “Implementation of an On Line Course in Heat Transfer and Fluid Mechanical”, Proceedings, International Mechanical Engineering Congress and Exposition, New Orleans.

Book Chapters & Review Articles

1. Kulacki, F. A., and Velkoff, H. R., 1977, “Electrostatic Cooling, American Society of Mechanical Engineers, Paper No. 77-DE-36.

2. Nguyen, A. T., and Kulacki, F. A., 1980, “Convection in Multi-Layer Systems: Preliminary Measurements of Heat Transfer and Temperature Distributions,” Mechanisms of Continental Drift and Plate Tectonics, Davies, P. A., and Runcorn, S. K. Eds., Academic Press, pp. 256-266.

3. Kulacki, F. A, 1983, “Electrohydrodynamic Augmentation of Convective Heat Transfer,” Advances in Transport Processes, Mashelkar, A., Ed., Wiley International, pp. 105-147.

4. Kulacki, F. A., 1983, “Augmentation of Low Reynolds Number Forced Convection Channel Flow by Corona Discharge,” Low Reynolds Number Flow Heat Exchangers, Kakac, S., et al., Eds., Hemisphere,
pp. 753-782.

5. Kulacki, F. A., and Richards, D. E., 1985, “Natural Convection in Plane Layers and Cavities with Volumetric Energy Sources,” Natural Convection: Fundamentals and Applications, Kakac, S. et al., Eds., Hemisphere, pp. 179-225.

6. Keyhani, M., and Kulacki, F. A., 1985, “Natural Convection in Enclosures Containing Rod Bundles,” Natural Convection: Fundamentals and Applications, Kakac, S. et al., Eds., Hemisphere, pp. 330-380.

7. Davidson, J. H., Kulacki, F.A., and Dunn, P. F., 1988, “Convective Heat Transfer with Electric and Magnetic Fields,” Handbook of Single Phase Convective Heat Transfer, Kakac, S., et al., Eds., John Wiley, New York,
Chapter 9 (49 pp.).

8. Lai, F. C., Choi, C. Y., Rajen, G., and Kulacki, F. A., 1989, “Modeling a Nuclear Waste Repository Using the CYBER 205”, Vector, Colorado State University Computing Center, Vol. 7, No. 2., pp. 12-13.

9. Lai, F. C., Kulacki, F. A., and Prasad, V., 1991, “Mixed Convection in Saturated Porous Media,” Convective Heat and Mass Transfer in Porous Media, Kakac, S., et al., Eds., Series E,: Applied Sciences, Vol. 109, Kluwer, pp. 225-278.

10. Kulacki, F. A., and Rajen, G., 1991, “Buoyancy Induced Flow and Heat Transfer in Fissured Media,” Convective Heat and Mass Transfer in Porous Media, Kakac, S., et al., Eds., Series E: Applied Sciences, Vol. 109, Kluwer, pp. 465-498.

11. Choi, C. Y., and Kulacki, F. A., 1992, “Mixed Convection in Vertical Porous Annuli,” Heat and Mass Transfer in Porous Media, Quintard, M., and Todorvic, Eds., Elsevier, New York, pp. 61-98.

12. Kulacki, F. A., Randall, J. D., Choi, C. Y., Keyhani, M., Lai, F.-C., and Rajen, G., 1996, “Thermal Engineering Aspects of High Level Nuclear Waste Storage and Disposal Recent Developments,” Proceedings, US/Japan Workshop on Heat Transfer, Sengupta, S., and Sano, T., Eds., Begell House, New York, pp. 279-304.

13. Aichlmayr, H.T., and Kulacki, F. A., 2006, “The Effective Thermal Conductivity of Saturated Porous Media”, Advanced in Heat Transfer, Vol. 39, Green, G. et al., Eds., 65 pp. (in press).

14. Contributor to the annual review of the heat transfer literature, 1994-2002: Eckert, E.R.G., et al., International Journal of Heat and Mass Transfer.

1994: Vol. 40, 1997, pp. 3729 – 3804 (free convection and porous media)
1995: Vol. 42, 1999, pp. 2717 – 2797 (free convection and porous media)
1996: Vol. 43, 2000, pp. 1273 – 1371 (free convection and porous media)
1997: Vol 43, 2000, pp. 2431 – 2538 (rotating flows and porous media)
1998: Vol. 44, 2001, pp. 253 – 366 (rotating flows and porous media)
1999: Vol. 44, 2001, pp. 3579 – 3699 (rotating flows and porous media)
2000: Vol. 45, 2002, pp. 2853 – 2957 (rotating flows and porous media)
2001: Vol. 46, 2003, pp. 1887 – 1992 (rotating flows and porous media)

2002 – Present: Goldstein, R.J. et al, International Journal of Heat and Mass Transfer

2002: Vol. 48, 2005 (rotating flows and porous media)
2003: Vol. 48, 2005 (rotating flows and porous media)

Technical Articles

1. Kulacki, F.A., and Gidaspow, D., 1967, “Convective Diffusion in a Parallel Plate Duct with One Catalytic Wall-First Order Reaction, Part II: Experimental,” Canadian Journal of Chemical Engineering, Vol. 45. pp. 72-78.

2. Kulacki, F.A., Gidaspow, D, and Solbrig, C. W., 1966, “Analysis of Nth Order Reaction Rate Data Using Mixing Cup Charts,” Proceedings, XXXVI Congres Inernationale de Chmie Industrielle, Brussels.

3. Kulacki, F.A, and Goldstein, R. J., 1972, “Thermal Convection in a Horizontal Fluid Layer with Uniform Volumetric Energy Sources,” Journal of Fluid Mechanics, Vol. 55, pp. 271-287.

4. Kulacki, F.A., and Goldstein, R. J., 1974, “Eddy Heat Transport In Thermal Convection in a Horizontal Fluid Layer with Uniform Volumetric Energy Sources,” Proceedings, 5th International Heat Transfer Conference, Hemisphere, Paper No. NC-2.6, pp. 64-68.

5. Reif, T. H., Nerem, R. M., and Kulacki, F.A., 1974, “An In Vitro Study of Transendothelial Albumin Transport in a Steady Pipe Flow and Higher Shear Rates,” Advances in Bioengineering, Brighton, J. A., and Goldstein, Eds., American Society of Mechanical Engineers, pp. 160-161; also, Journal of Fluids Engineering, Vol. 98, 1976, pp. 488-493 (1976).

6. Kulacki, F.A., and Goldstein, R. J., 1975, “Hydrodynamic Stability in Fluid Layers with Volumetric Energy Sources,” Applied Scientific Research, Vol. 31, and pp. 81-92.

7. Kulacki, F.A., and Nagle, M. E., 1975, “Natural Convection in a Horizontal Fluid Layer with Volumetric Energy Sources,” Journal of Heat Transfer, Vol. 97, pp. 204-211.

8. Kulacki, F.A., 1975, “Molten Core Heat Transfer Studies,” Proceedings, Post Accident Heat Removal (PAHR) Information Exchange, Coates, R. L., Ed., Sandia National Laboratories, Tech. Rpt. No. SND75-0497; also, US Nuclear Regulatory Commission, NUREG76-6505, 1976.

9. Kulacki, F.A,, and Ramchandani, R., 1975, “Hydrodynamic Stability in a Porous Layer with a Heat Generating Fluid,” Warme-Und Stoffubertra-gung, Vol. 8, pp. 197-185

10. Kulacki, F.A., Emara, A. A., and Min, J. H., 1975, “Natural Convection in Internally Heated Fluid Layers-PAHR Applications,” Proceedings, Post Accident Heat Removal Information Exchange Meeting, Sandia National Laboratories.

11. Kulacki, F.A., and Emara, A. A., 1975, “Heat Transfer Correlations for Use in PAHR Analysis and Design,” Transactions, American Nuclear Society, Vol. 22, pp. 447-448.

12. Baker, L., Faw, R. E., and Kulacki, F.A., 1976, “Post Accident Heat Removal I: Heat Transfer within an Internally Heated Non-Boiling Liquid Layer,” Journal of Nuclear Science and Engineering, Vol. 61,
pp. 222-230.

13. Goldstein, R. J., Chu, T. Y., and Kulacki, F.A., 1977, “Optical Studies of Thermal Convection,” ASME/ESL Heat Transfer Film Library, Engineering Societies Library, No. G-5.

14. Kulacki, F.A., and Emara, A. A., 1977, “Steady and Transient Thermal Convection in a Fluid Layer with Uniform Volumetric Energy Sources,” Journal of Fluid Mechanics, Vol. 83,, pp. 375-395.

15. Kulacki, F.A., and Kennedy, S. C., 1978, “Measurement of the Thermophysical Properties of Common Cookie Dough,” Journal of Food Science, Vol. 43, pp. 380-384.

16. Kulacki, F.A., and Daubenmier, J. A., 1978, “A Preliminary Study of Electrohydrodynamic Augments Baking,” Journal of Electrostatics, Vol., 5, pp. 325-336.

17. Min, J. H., and Kulacki, F.A., 1978, “An Experimental Study of Thermal Convection with Volumetric Energy Sources in a Fluid Layer Bounded from Below by a Segment of a Sphere,” Proceedings, 6th International Heat Transfer Conference, National Research Council of Canada, Vol. 5, pp. 155-160.

18. Lambha, N. K., Korpela, S. A., and Kulacki, F.A., 1978, “Thermal Convection in a Cylindrical Cavity with Uniform Volumetric Energy Generation,” Proceedings, 6th International Heat Transfer Conference, National Research Council of Canada, Vol. 2, pp. 311-316.

19. Kulacki, F.A., Emara, A. A., Korpela, S. A., Lambha, N. K., and Min, J., 1978, “Natural Convection with Internal Energy Sources. Some Recent Experimental and Numerical Results with Post-Accident Heat Removal Applications,” Proceedings, Post-Accident Heat Removal Information Exchange Meeting, Baker, L., Ed., Argonne National Laboratory, ANL-78-10, pp. 110-113.

20. Min, J. H., and Kulacki, F.A., 1978, “An Experimental Study of Transient Natural Convection in Lenticular Heat-Generating Single Phase Pools,” Proceedings, ENS/ANS Topical Meeting on Nuclear Power Reactor Safety, Brussels, Vol. 2, pp. 1284-1294.

21. Kulacki, F.A., Min, J. H., Nguyen A. T., and Keyhani, M., 1978, “Steady and Transient Natural Convection in Single and Multi-Fluid Layers with Heat Generation,” Proceedings, 4th Post-Accident Heat Removal (PAHR) Information Exchange Meeting, Ispra Joint Establishment of the Joint Research Center for the Commission of the European Communities, Coen, V., and Hotbecker, H. Eds., (in European Applied Research Reports, Vol. 1, pp. 1412-1427).

22. Kulacki, F.A., and Freeman, R. G., 1979, “A Note on Thermal Convection in a Saturated, Heat-Generating Porous Layer,” Journal of Heat Transfer, Vol. 101, pp. 169-171.

23. Min, J. H., and Kulacki, F.A., 1979, “An Experimental Study of Transient Natural Convection in Lenticular Heat-Generating Single-Phase Pools,” Journal of Nuclear Engineering and Design, Vol. 54, pp. 267-278.

24. Mintzer, O. W., Kulacki, F.A., and Greenberger, S., 1979, “Potential of Thermal Imaging for Determination of Building Heat Loss,” Proceedings, 2nd International Conference on Low Light and Thermal Imaging, Institution of Electrical Engineers, University of Nottingham, pp. 68-69.

25. O’Hara, F.A., Miller, N. , Asmus, K. R., Means, J. L., Christensen, R. N., and Kulacki, F. A., 1979, “Initial High-Level Waste Acceptance Criteria,” Proceedings, International Symposium on Ceramics in Nuclear Waste Management, US Department of Energy, CONF-79-420.

26. Christensen, R. N., Kulacki, F.A., Miller, N. E., and O’Hara, F.A., 1979, “Waste Characteristics that May Require Specification in Waste Acceptance Criteria,” Transactions, American Nuclear Society, Vol. 32, pp. 383-385.

27. Emara, A. A., and Kulacki, F.A., 1980, “A Numerical Investigation of Thermal convection in a Heat-Generating Fluid Layer,” Journal of Heat Transfer, Vol. 103, pp. 531-537; also, American Society of Mechanical Engineers, Paper No. 79-HT-103, 1979.

28. Schlosser, P. A., DeVuono, A. C., Kulacki, F.A., and Munshi, P., 1980, “Analysis of High Speed CT Scanners for Non-Medical Applications,” IEEE Transactions on Nuclear Science, Vol. NS-27, pp. 788-794.

29. DeVuono, A. C., Schlosser, P.A., Kulacki, F.A., and Munshi, P., 1980, “Design of an Isotopic CT Scanner for Two- Phase Flow Measurements,” IEEE Transactions on Nuclear Science, Vol. NS-27, pp. 814-820.

30. Kulacki, F.A., Schlosser, P.A., DeVuono, A. C., and Munshi, P., 1980, “A Preliminary of the Application of Reconstruction Tomography to Void Fraction Measurements in Two-Phase Flow,” Proceedings, ANS/ASME/NRC International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Fundamental Aspects of Two-Phase Flow and Boiling Heat Transfer, US Nuclear Regulatory Commission, NUREG/CP-0014, Vol. 2, pp. 904-922.

31. Schlosser, P.A., DeVuono, A. C., Kulacki, F.A.,, and Munshi, P.A., 1980, “Cross Sectional Density Measurement of Multiphase Flow Using Computerized Tomography,” Proceedings, 1980 Symposium on Instrumentation and Control for Fossil Energy Processes, Argonne National Laboratory, ANL-80-62.

32. Kulacki, F.A., and Boriah, S., 1980, “Catalytic Combustion in a Tube with Electrical Discharge: Preliminary Measurement of Augmented Reaction Rates,” Nature, Vol. 282, pp. 362-364.

33. Kulacki, F.A., Boriah, S., and Martin, S. A., 1981, “Corona Discharge Augmentation of the Catalytic Combustion of Hydrogen in the Diffusion Controlled Regime,” International Journal of Hydrogen Energy, Vol. 6, pp. 73-95; also, Hydrogen Energy Processes, Veziroglu, T. N., et al., Eds., Pergamon, pp. 2286-2311.

34. Christensen, R. N., Gear, D. W., and Kulacki, F.A., 1981, “Mixed Convection in Rectangular Channel Flow with Smooth Surfaces and One Heated Wall,” American Society of Mechanical Engineers, Paper No. 81-HT-6.

35. Blesch, C. J., Kulacki, F. A., and Christensen, R. N., 1981, “Rapid Estimation of the Regional Thermal Impact of a Nuclear Waste Repository,” Transactions, American nuclear Society, Vol. 39, pp. 177-179.

36. Blesch, C. J., Kulacki, F.A., and Christensen, R. N., 1982, “Rapid Estimation of the Regional Thermal Response to a Nuclear Waste Repository - Limiting Case Analysis,” Journal of Nuclear Technology, Vol. 59, p. 174-178.

37. Kulacki, F.A. and Kevra, J. M., 1982, “Corona Wind Augmented Baking,” Drying ’82, Majumdar, A. S., Ed., Hemisphere, pp. 183-195.

38. Min, J. H., and Kulacki, F.A., 1982, “Natural Convection with Volumetric Energy Sources in Fluid Bounded by a Spherical Segment,” Proceedings, 7th International Heat Transfer Conference, Hemisphere, Vol. 2, pp. 165-170.

39. Kulacki, F.A., Mintzer, O. W. and Winget, L. E., 1983, “Remote Sensing of Building Heat Loss - A Case Study of Development of Methodology,” Proceedings, Thermal Infrared Sensing Applied to Energy Conservation in Building Envelopes (Thermosense IV), Grot, R. A., and Wood, J. T., Eds., SPIE-The International Society of Optical Engineering, Billingham.

40. Nelson, K. N., Fitzgerald, D., and Kulacki, F.A., 1982, “Augmentation of Gas-Phase Combustion by Treatment of Combustion Air,” Proceedings, 4th Miami International Conference on Alternative Energy Sources, Veziroglu, N. T., et al., Eds., Ann Arbour Science Publishers.

41. Nelson, K. L., Whitmore, J. D., and Kulacki, F.A., 1983, “Field Test Evaluation of Passive/Hybrid Vertical Solar Collector in the Northern Latitudes,” Proceedings, Alternative Energy Sources V., Part A: Solar Radiation/Collection/Storage, Veziroglu, T. N., Eds., Elsevier, pp. 1137-1147.

42. Mintzer, O. W., Kulacki, F.A., and Winget, L. E., 1983, “Measuring Heat Loss from Flat-Roofed Buildings with Calibrated Thermography,” Photogrammetric Engineering and Remote Sensing, Vol. 49, pp. 777-788.

43. Keyhani, M., and Kulacki, F.A., 1983, “Experiments on Transient Thermal Convection with Internal Heating - Large Time Results,” Journal of Heat Transfer, Vol. 105, pp. 261-266.

44. Keyhani, M. Kulacki, F.A., and Christensen, R. N., 1983, “Free Convection in a Vertical Annulus with Constant Heat Flux on the Inner Wall,” Journal of Heat Transfer, Vol. 105, pp. 454-459.

45. Bushan, R., Keyhani, M., Christensen, R. N., and Kulacki, F.A., 1983, “Correlations for Convective Heat Transfer in Vertical Annular Gas Layers with Constant Heat flux on the Inner Wall,” Journal of Heat Transfer, Vol. 105, pp. 910-912.

46. Keyhani, M., Bushan, R., Christensen, R. N., and Kulacki, F.A., 1983, “Estimates of Maximum Temperatures in Spent Fuel Waste Packages Via Generalized Correlations for Convective Heat Transfer,” Transactions, American Nuclear Society, Vol. 45, pp. 138-139.

47. Kulacki, F.A,. and Nguyen, A. T., 1983, “Thermal Convection in a Two-Fluid Layer Driven by Volumetric Energy Generation,” American Society of Mechanical Engineers, Paper No. 83-HT-72..

48. Prasad, V., and Kulacki, F.A., 1984, “Natural Convection in a Horizontal Porous Cavity with Constant Heat Flux on One Vertical Wall,” Journal of heat Transfer, Vol. 106, pp. 152-157; also, Heat Transfer in Porous Media, Beck, J. V., and Yao, L. S. Eds., American Society of Mechanical Engineers, 1982, pp. 35-42.

49. Prasad, V., and Kulacki, F.A., 1984, “Natural Convection in a Vertical Porous Annulus,” International Journal of Heat and Mass Transfer, Vol. 27, pp. 207-219; also “Experimental Investigation of Buoyancy Driven Heat Transfer in Vertical Porous Annuli”, Proceedings, 20th Annual Meeting, Society of Engineering Science, University of Delaware, Newark, August 22-24, 1983 (Extended Abstract).

50. Prasad, V., and Kulacki, F.A., 1984, “Convective heat Transfer in a Rectangular Porous Cavity-Effect of Aspect Ratio on Flow Structure and Heat Transfer,” Journal of Heat Transfer, Vol. 106, pp. 158-165.

51. Farouk, B., Kulacki, F.A., and Guceri, S. I., 1984, “Turbulent Thermal Convection in a Confined Heat Generating Fluid Layer,” American Society of Mechanical Engineers, Paper No. 84-HT-59.

52. Muralidhar, K., and Kulacki, F.A., 1984, “Buoyancy Effects on a Turbulent Mixing Layer,” American Society of Mechanical Engineers, Paper No. 84-HT-64.

53. Prasad, V., and Kulacki, F.A., 1985, “Natural Convection in Porous Media bounded by Short Concentric Cylinders,” Journal of Heat Transfer, Vol. 197, pp. 147-154; also, American Society of Mechanical Engineers, Paper No. 84-HT-76, 1984, and “Effect of Heated Wall Boundary Condition on Free Convection in Vertical Annuli Billed with Saturated Porous Media”, Proceedings, 21st Annual Meeting, Society for Engineering Science, Virginia Polytechnic Institute and State University, Blacksburg, October 15-17, 1984 (Extended Abstract).

54. Prasad, V., and Kulacki, F.A., 1985, “Free Convective Heat Transfer in a Liquid-Filled Vertical Annulus,” Journal of Heat Transfer, Vol. 107, pp. 596-602.

55. Prasad, V., Kulacki, F.A., and Keyhani, M., 1985, “Natural Convection in Porous Media, Journal of Fluid Mechanics, Vol. 150, pp. 89-119.

56. Rajen, G., and Kulacki, F.A., 1985, “Thermal Convection Through A System of Idealized Fissures,” Proceedings, 26th US Symposium on Rock Mechanics, Ashworth, E., Ed., Balkema, pp. 817-830.

57. Keyhani, M., Kulacki, F.A., and Christensen, R. N., 1985, “Experimental Investigation of Free Convection on a Vertical Rod Bundle - Generalized Correlations for Nusselt Numbers,” Journal of Heat Transfer, Vol. 107, pp. 611-623; also, “Experimental Investigation of Free Convection on a Vertical Rod Bundle, American Society of Mechanical Engineers, 1984, Paper No. 84-HT-82.

58. Muralidhar, K., and Kulacki, F.A., 1985, “Experimental Study of Stratified Flow,” American Society of Mechanical Engineers, Paper No. 85-HT-39.

59. Hatta, H., Taya, M., and Kulacki, F.A., 1985, “Thermal Conductivity of Short Fiber Composites,” Proceedings, 5th International Conference on Composite Materials, Harrigan, W. C, et al., Eds., American Institute of Mining Engineers, pp. 1667-1681.

60. Maguire, D. M., and Kulacki, F.A., 1985, “Thermophysical Properties of Composite Materials,” Proceedings, 5th International Composite Materials, Harrigan, W. C., et al., Eds., American Institute of Mining Engineers, pp. 18711-1726.

61. Prasad, V., and Kulacki, F.A., 1985, “Natural Convection in Horizontal Porous Layers with Localized Heating From Blow,” Heat Transfer in Porous Media and Particulate Flows, Yao, L. S., et al., Eds., American Society of Mechanical Engineers, HTD-Vol. 46., pp. 199-208; also, Journal of Heat Transfer, Vol. 109, pp. 759-798.; also, extended abstract in Proceedings, 22nd Annual Meeting of the Society of Engineering Science, Pennsylvania State University, 1985, p. 203.

62. Prasad, V., Kulacki, F.A., and Kulkarni, A., 1986, “Free Convection in a Vertical Porous Annulus, International Journal of Heat and Mass Transfer, Vol. 29, pp. 713-723.

63. Prasad, V., and Kulacki, F.A., 1986, “Effects of the Size of Heat Source on Natural Convection in Horizontal Porous Layers Heated From Below,” Proceedings, 8th International Heat Transfer Conference, Hemisphere, pp. 2677-2682.

64. Muralidhar, K., Baunchalk, R., and Kulacki, F.A., 1986, “Natural Convection in a Horizontal Porous Annulus with a Step Distribution in Permeability,” Journal of Heat Transfer, Vol. 108, pp. 889-893.

65. Prasad, V., Kulacki, F.A., and Stone, K., 1986, “Free Convection in A Porous Cavity with a Finite Heat Source,” Natural Convection in Enclosures - 1986, Figliola, R. S., and Catton, I., Eds., American Society of Mechanical Engineers New York, HTD-Vol. 63, pp. 91-98.

66. Keyhani, M., Prasad, V., and Kulacki, F.A., 1986, “An Approximate Analysis for Thermal Convection with Application to the Vertical Annulus,” Chemical Engineering Communications, Vol. 42, pp. 281-289.

67. Jones, A. E., Rajen, G., and Kulacki F.A., 1986, “Convective Heat Transfer in Partially Filled Horizontal Cylinders,” American Society of Chemical Engineers National Meeting, Paper No. 26a.

68. Lai, F. C., and Kulacki, F.A., 1987, “Non-Darcy Convection from a Horizontal Impermeable Surface in Saturated Porous Media,” International Journal of Heat and Mass Transfer, Vol., 30, pp. 2189-2192.

69. Rajen, G., and Kulacki, F.A., 1987, “Natural Convection in a Porous Layer locally Heated from Below - A regional Laboratory Model for a Nuclear Waste Repository,” Heat Transfer Problems in Nuclear Waste Management, McAssey, E. V., and Shrock, V., Eds., American Society of Mechanical Engineers, HTD-Vol. 67, pp. 19-26.

70. Rajen, G., and Kulacki, F.A., 1987, “Hydrothermal Impact of a Nuclear Waste Repository,” Proceedings, 28th US Symposium on Rock Mechanics, Farmer, I. W., et al., Eds., Balkema, pp. 755-762.

71. Rajen, G., and Kulacki, F.A., 1987, “A Boundary Element Analysis of Thermal Convection in Fluids in Porous Media,” Proceedings, IUTAM Symposium on Advanced Boundary Element Methods for Fluid and Solid Mechanics, San Antonio.

72. Kulacki, F. A., and Keyhani, M., 1987, “Heat Transfer Aspects of Nuclear Waste Disposal,” Heat Transfer Problems in Nuclear Waste Management, McAssey, E. V., and Shrock, V., Eds., American Society of Mechanical Engineers, HTD-Vol. 67, Book No. H00386, pp. 1-19.

73. Lai, F. C., Kulacki F. A., and Prasad, V., 1987, “Numerical Study of Mixed Convection in Porous Media,” Proceedings, Fifth International Conference on Numerical Methods in Thermal Problems, Lewis, R. W. et al., Eds., Pineridge, Part 1, pp. 784-796.

74. Lai, F. C., and Kulacki, F. A., 1987, “Natural Convection in Layered Porous Media Partially Heated From Below,” Heat Transfer in Geophysical and Geothermal Systems, Vafai, K., et al., Eds., HTD-Vol. 76, American Society of Mechanical Engineers, pp. 27-36.

75. Vanover, D.E., and Kulacki, F.A., 1987, “Experimental Study of Mixed Convection in a Horizontal Annulus,” Mixed Convection Heat Transfer, Prasad, V., et al., Eds., HTD-Vol. 84, American Society of Mechanical Engineers, pp. 51-60.

76. Muralidhar, K., and Kulacki, F.A., 1987, “Stability of Mixed Convection Flow,” International Journal of Heat and Fluid Flow, Vol. 8, pp. 228-234.

77. Lai, F. C., Kulacki, F.A., and Prasad, V., 1987, “Mixed Convection in Horizontal Porous Layers: Effects of thermal Boundary Conditions,” Mixed Convection Heat Transfer-1987, Prasad, V. et al, Eds., HTD-Vol. 84, American Society of Mechanical Engineers, pp. 91-96.

78. Lai, F. C., Prasad, V., and Kulacki, F.A., 1987, “Effects of Size of Heat Source on Mixed Convection in Porous Layer Heated from Below,” Proceedings, Second ASME/JSME Thermal Engineering Joint Conference, Vol. 2, pp. 413-419.

79. Prasad, V., Lai, F. C., and Kulacki, F.A., 1988, “Mixed Convection in Horizontal Porous Layers Heated From Below,” Journal of Heat Transfer, Vol. 110, pp. 395-402; also, Paper No. 86-HT-16, American Society of Mechanical Engineers, 1986.

80. Muralidhar, K., and Kulacki, F.A., 1988, “Non-Darcy Convection in a Saturated Horizontal Porous Annulus,” Journal of Heat Transfer, Vol. 110, pp. 133-139; also, “Natural Convection in Porous Media”, Prasad, V., and Hussain, Eds., American Society of Mechanical Engineers, HTD-Vol. 56, pp. 23-31 (1986).

81. Lai, F. C., Prasad, V., and Kulacki F.A., 1988, “Aiding and Opposing Mixed convection in A Vertical Porous Layer with a Finite Wall Heat Source,” International Journal of Heat and Mass Transfer, Vol. 31, pp. 1049-1061.

82. Lai, F. C., and Kulacki, F.A., 1988, “Natural Convection Across A vertical Layered Porous Cavity,” International Journal of Heat and Mass Transfer, Vol. 31, pp. 1247-1260.

83. Lai, F. C., and Kulacki, F.A., 1988, “Effects of Flow Inertia on Mixed convection Along a Vertical Surface in A Saturated Porous Medium,” Proceedings, ASME/AIChE National Heat Transfer Conference, Jacobs, H.R., Ed., American Society of Mechanical Engineers, Vol. 3, pp. 643-652.

84. Lai, F. C., and Kulacki, F.A., 1988, “Transient Mixed Convection in Horizontal Porous Layers Partially Heated From Below,” Proceedings, ASME/AIChE National Heat Transfer Conference, Jacobs, H.R., Ed., American Society of Mechanical Engineers, Vol. 2, pp. 353-365.

85. Keyhani, V., Christensen,, R. N. and Kulacki, F.A., 1988, “Nusselt Numbers in a Rectangular Channel with Heating on the Floor,” Proceedings, ASME/AIChE National Heat Transfer Conference, Jacobs, H. R., Ed., American Society of Mechanical Engineers, Vol. 3, pp. 155-168.

86. Choi, C. Y., Lai, F. C., and Kulacki, F.A., 1989, “Mixed convection in a Vertical Porous Annulus,” AIChE Symposium Series, No. 269, ASME/AIChE National heat Transfer Conference, American Institute of Chemical Engineers.

87. Lai, F. C., and Kulacki, F.A., 1989, “Thermal Dispersion Effects on Non-Darcy Convection over Horizontal Surfaces in Saturated Porous Media,” International Journal of Heat and mass Transfer, Vol. 32, pp. 971-976.

88. Lai, F. C., and Kulacki, F.A., 1989, “The Effects of Variable Fluid Viscosity on Film Condensation Along an Inclined Surface in a Saturated Porous Medium,“ Multiphase Transport in Porous Media, Eaton, R., Ed., FED Vol.-82/HTD Vol.-127, American Society of Mechanical Engineers, pp. 7-12.

89. Lai, F. C., and Kulacki, F.A., 1990, “The Influence of Lateral Mass Flux on Mixed Convection Over Inclined Surfaces in Saturated Porous Media,” Journal of Heat Transfer, Vol. 112, pp. 515-518.

90. Lai, F. C., Pop, I, and Kulacki, F.A., 1990, “Natural Convection From Isothermal Plates Embedded in Thermally Stratified Porous Media,” Journal of Thermophysics and Heat Transfer, Vol. 4, pp. 533-535.

91. Lai, F. C., and Kulacki, F.A., 1990, “Coupled Heat and Mass Transfer from a Sphere Buried in an Infinite Porous Medium,” International Journal of Heat and Mass Transfer, Vol. 33, pp. 209-215.

92. Lai, F. C., Pop, I., and Kulacki F.A., 1990, “Free and Mixed Convection from Slender Bodies of Revolution, International Journal of Heat and Mass Transfer, Vol. 33, pp. 525-541.

93. Choi, C. Y., and Kulacki, F.A., 1990, “Non-Darcian Effects on Mixed Convection Vertical Porous Annuli,” Proceedings, 9th International Heat Transfer Conference, Hemisphere, Paper 15-PB-22, pp., 271-276; also, Journal of Heat Transfer, Vol. 115, pp. 506-510 (1992).

94. Lai, F. C., and Kulacki, F.A., 1991, “Experimental Study of Free and Mixed Convection in a Horizontal Porous Layer Locally Heated from Below,” International Journal of Heat and Mass Transfer, Vol. 34, pp. 525-541.

95. Choi, C. Y., Lai, F. C., and Kulacki, F.A., 1990, “Natural Convection in Vertical, Heat-Generating Porous Annuli,” Heat and Mass Transfer in Frost, Ice, Packed beds, and Environmental Discharges, Armilli, R. V., et al., Eds., HTD Vol.-139, American Society of Mechanical Engineers, pp. 356-361.

96. Rajen, G., and Kulacki, F.A., 1990, “Three-Dimensional Natural Convection in A Porous Layer Locally Heated From Below,” Heat and Mass Transfer in Frost, Ice, Packed Beds and Environmental Discharges, Armilli, R. V., et al., Eds., HTD Vol.-139, American Society of Mechanical Engineers, pp. 65-70.

97. Lai, F. C., Choi, C. Y., and Kulacki, F.A., 1990, “Coupled Heat and Mass Transfer by Natural Convection from Slender Bodies of Revolution in Porous Media,” Heat and Mass Transfer in Frost, Ice, Packed Beds, and Environmental Discharges, Armilli, R. V., et al., Eds., HTD Vol. 139, American Society of Mechanical Engineers, pp. 101-106.

98. Lai, F. C., and Kulacki F.A., 1990, “Free and Mixed Convection in Horizontal Porous Layers with Multiple Heat Sources, “ Journal of Thermophysics and Heat Transfer, Vol. 4, pp. 221-227; also, “Mixed Convection in Horizontal Porous Layers with Discrete Heat Sources,” AIAA Paper No. 88-0660, and “Natural Convection in Horizontal Porous Layers with Discrete Heat Sources,” 26th Aerospace Sciences Meeting, AIAA Paper No. 88-0659 (with F. C. Lai and C. Y. Choi).

99. Rajen, G., and Kulacki, F.A., 1990, “Three-Dimensional Buoyancy Induced flow and Heat Transfer Around and Underground Porous Structure,” Proceedings, International Symposium on Unique Underground Structure, Sinha, R. S., Ed., US Bureau of Reclamation, Vol. 1, pp. 12-1 to 12-16.

100. Lai, F. C., and Kulacki, F.A., 1990, “Experimental Study of Natural Convection in Horizontal Porous Layers with Multiple Heat Sources,” 28th Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics, Paper No. 90-0257; also, Journal of Thermophysics and Heat Transfer, October-December, Vol. 5, pp. 626-630.

101. Lai, F. C., and Kulacki, F.A., 1991, “Oscillatory Mixed Convection in Horizontal Porous Layers Locally Heated From Below,” International Journal of Heat and Mass Transfer, Vol. 34, pp. 887-890.

102. Lai, F. C., and Kulacki, F.A., 1991, “Coupled Heat and Mass Transfer by Natural Convection from Vertical Surfaces in Porous Media,” International Journal of Heat and Mass Transfer, Vol. 34, PP. 1189-1194.

103. Lai, F. C., and Kulacki F.A., 1991, “Non-Darcy Convection Along a Vertical Wall in a Saturated Porous Medium,” Journal of Heat Transfer, Vol. 113, pp. 252-256.

104. Lai, F. C., and Kulacki, F.A., 1991, “The Effect of Variable Viscosity on Convective Heat and Mass Transfer along a Vertical Surface in Saturated Porous Media,” International Journal of Heat and Mass Transfer, Vol. 33, pp. 1028-1031.

105. Lai, F. C., and Kulacki, F.A., 1991, “The Influence of Surface Mass Flux on Mixed Convection Over a Horizontal Plate in a Saturated Porous Medium,” International Journal of Heat and Mass Transfer, Vol. 33, pp. 576-579.

106. Choi, Y. C., and Kulacki, F.A., 1992, “Mixed Convection Through Vertical Porous Annuli Locally Heated From the Inner Cylinder,” Journal of Heat Transfer, Vol. 114, pp. 143-151.

107. Hatta, H., Taya, M., Kulacki, F.A., and Harder, J.F., 1991, “Thermal Diffusivities of Composites with Various Types of Filler,” Journal of Composite Materials, Vol. 26, No. 5, pp. 612-65.

108. Rajen, G., and Kulacki, F.A., 1992, “Vibration Induced Thermal Convection in Fluid-Saturated Porous Media,” Fundamentals of Heat Transfer in Porous Media, Kaviany, M., Ed., HTD Vol. 193, American Society of Mechanical Engineers, New York, pp. 87-90.

109. Keyhani, M., and Kulacki, F.A., 1992, “Convective Heat Transfer in Spent Fuel Canisters, Proceedings, Third International Conference on High Level Radioactive Waste Management, Tulenko, J. S., Ed., American Nuclear Society and American Society of Civil Engineers, Vol. 1, pp. 773-778 (invited paper).

110. Olwi, I., and Kulacki, F.A., 1995, “Numerical Simulation of Transient Convection Processes in a Volumetrically Heated Fluid Layer, Proceedings, ASME/ JSME Thermal Engineering Conference, American Society of Mechanical Engineers, New York.

111. Yokoyama, Y., and Kulacki, F.A., 1996, “Mixed Convection in a Horizontal Porous Duct with a Sudden Expansion Locally Heated From Below,” Proceedings, ASME/AIChE National Heat Transfer Conference, HTD-Vol. 331, Vol. 9, H. A. Hadim, et al., Eds., American Society of Mechanical Engineers, New York, pp. 33-41; also, 1999, Journal of Heat Transfer, Vol. 121, pp. 653-661.

112. Jendoubi, S., and Kulacki F.A., 1996, “A Generalized Model for Determining the Thermal Response to a Nuclear Waste Repository”, Proceedings, International Congress and Exposition on Mechanical Engineering, Vol. 4 (HTD-Vol. 335), Pepper, D. W., et al (Eds.), American Society of Mechanical Engineers, New York, pp. 177-188.

113. Jendoubi, S., and Kulacki, F. A., 1997, “Penetrative Convection in Porous Media,” Proceedings, ASME/AIChE National Heat Transfer Conference, American Society of Mechanical Engineers, New York.

114. Jendoubi, S., and Kulacki, F.A., 1997, “Mixed Convection in a Two-Layer Porous Medium”, Proceedings, International Congress and Exposition on Mechanical Engineering, American Society of Mechanical Engineers, New York.

115. Jendoubi, S., and Kulacki, F.A., 1999, “Convection in Layered Porous Media: A Comparison of Boundary Heating Methods”, Proceedings, ASME/JSME Joint Thermal Engineering Conference, Paper No. AJTE99-6281 (CD ROM Format), American Society of Mechanical Engineers, New York.

116. Anderson, C. V. D., and Kulacki, F. A., 2000, "A Portable Water Pasteurization System for Developing Countries: Design, Analysis, and Proof-of-Concept Experiments," Proceedings, 2000 ASME ICEME.

117. Liu, W., Davidson, J. H., and Kulacki, F. A., “Natural Convection from a Single Tube Immersed in a Tilted Thin Enclosure,” ,2001, Proceedings, International Conference on Energy Conversion and Application, Wei, L., Ed., Huazhong University of Science and Technology, Wuhan, P. R. China.

118. Aichlmayr, H. T., and Kulacki, F.A., 2001, “A Review of Models of Effective Thermal Conductivity of Saturated Porous Media, “Proceedings, International Conference on Energy Conversion and Application, Wei, L., Ed., Huazhong University of Science and Technology, Wuhan, P. R. China.

119. Davidson, J. H., Mantell, S. C., Kulacki, F.A. , Liu, W., and Wu, C, 2002, “Mechanical and Thermal Performance of Polymer Heat Exchangers for Solar Hot Water,” Proceedings, 12th International Heat Transfer Conference,
Elsevier, 2002 , pp. 357-364.

120. W. Liu, J. H. Davidson, F. A. Kulacki, and S. C. Mantell, 2003, “Natural Convection from a Horizontal Tube Heat Exchanger Immersed in a Tilted Enclosure, Proceedings, ASME Solar Engineering Conference, Reno, 2002; also, 2003, Journal of Solar Engineering, Vol. 125, pp., 67-75.

121. W. Liu, J. H. Davidson, and F. A. Kulacki, 2003, “Natural Convection from and Enclosed Eight-Tube Heat Exchanger”, 2003, Proceedings, International Mechanical Engineering Conference and Exposition, Paper IMECE2003-44543, ASME, New York (CD-ROM); also, 2004, “Natural Convection from a Tube Bundle in A Thin Inclined Enclosure, Journal of Solar Energy Engineering, 2004, Vol. 126, pp.702-709.

122. W. Liu, J. H. Davidson, and F. A. Kulacki, 2003, “Thermal Characterization of Prototypical Integral Collector-Storage Systems: Thermal Design Guidelines”, Proceedings, Solar Engineering Conference, American Society of Mechanical Engineers; also, 2005, “Thermal Characterization of Prototypical Integral Collector Storage Systems with Immersed Heat Exchangers”, Journal of Solar Energy Engineering, Vol. 127, pp. 21-28.

123. Sakamoto, H., and Kulacki, F. A., 2005, “Buoyancy-Driven Flow in Saturated Porous Media”, Proceedings, 2005 National Heat Transfer Conference, Paper HT2005-72435, American Society of Mechanical Engineering, New York; Journal of Heat Transfer 2006, (in press).

124. Peters, K. H., and Kulacki, F. A., 2005, “Flow Boiling in Microchannels”, Proceedings, 2005 National Heat Transfer Conference, American Society of Mechanical Engineers, New York (in press); Journal of Heat Transfer (submitted).

125. Aichlmayr, H. T., and Kulacki, F. A., 2005, “A Transient Technique for Measuring the Effective Thermal Conductivity of Saturated Porous Media with a Constant Boundary Heat Flux", Journal of Heat Transfer, Vol. 128, 2006, pp. 1217 -1220; also, Proceedings, 2005 National Heat Transfer Conference, American Society of Mechanical Engineers, New York.

126. Kohl, M.J., Kristofferson, M., and Kulacki, F.A., 2005 “Transient Stability and Convection in Impulsively Heated Porous Layers”, Proceedings, 2005 National Heat Transfer Conference, San Francisco; also, Journal of Heat Transfer (to be submitted).

127. Sakamoto, H., and Kulacki, F. A., 2005, “Near Wall Stagnant Thermal Conductivity of Porous Media”, Proceedings, 2005 International Mechanical Congress and Exposition, American Society of Mechanical Engineers, New York; also, 2006, Journal of Heat Transfer (in press).

128. Arneson, C. T., and Kulacki, F.A., 2006, Enhanced Forced Convection from a Tube Embedded in a Metal Foam, Proceedings, 13th International Heat Transfer Conference, Sydney.

129. Kristofferson, M., and Kulacki, F. A., 2006, Turbulence in a Porous Medium Heat from Below, Proceedings, 13th International Heat Transfer Conference, Sydney.

130. Kulacki, F. A., Davidson, J. H., and Hebert, M., 2007, “Are Baffles in Indirect Solar Storage Tanks Effective?”, Journal of Solar Energy Engineering (in revision); also, Kulacki, F. A., Davidson, J. H., Su, Y., and Hebert, M., 2006, "Are Baffels in Indirect Solar Storage Tanks Effective?", Proceedings, Solar 2006, American Solar Energy Society, (CD ROM).

Books & Conference Volumes Edited

1. Thermal and Hydraulic Aspects of Nuclear Reactor Safety, Vol. 1.: Light Water Rectors and Vol. 2: Liquid Metal Fast Breeder Reactors, Associate Editor (with O. C. Jones, Jr., and S. G. Bankoff, Eds., and Y. Y. Hsu, R. T. Lahey, N. E. Todreas, A. A. Bishop, J. C. Chen, D. S. Rowe, and V. Shrock, Assoc. Eds.), American Society of Mechanical Engineers, New York, 1977.

2. “Thermal and Hydraulic Aspects of Nuclear Reactor Safety (Contributed Papers Volume), Co-Editor with A. A. Bishop,
O. C. Jones, Jr., and S. G. Bankoff, American Society of Mechanical Engineering, New York, 1977.

3. Heat Transfer in Nuclear Waste Disposal, with R. W. Lyczkowski, Symposium Vol. No. 11, Winter Annual Meeting, American Society of Mechanical Engineers, New York, 1980.

4. Convective Heat and Mass Transfer in Porous Media, S. Kakac, B. Kilkis, F. A. Kulacki, and F. Arinc, Eds., Series E: Applied Sciences NATO AS Series, Vol. 196, Kluwer, 1991.

5. Proceedings, Fourth World Conference on Engineering Education, Krueger, E. R., and Kulacki, F. A., Eds., Technology-Based Engineering Education Consortium, William C. Norris Institute, Bloomington, 1995.

6. “Enhancing Curriculum Structure and Content with Technology”, Siller, T. J., Basu, P. K, and Kulacki, F.A., Eds., Proceedings, Ninth Annual Conference, Technology-Based Engineering Education Consortium, William C. Norris Institute, Bloomington, 1997.