Return to: U of M Home

Publications

C. C. Hayes, (2008) “Barriers to Collaboration in Distributed Design Teams: A Case Study from the Medical Device Industry” submitted to the IEEE Transactions on Engineering Management.

Akhavi, F. and C. C. Hayes (2008) “Can Decision-aiding Tools Incorporating Uncertainty Help in Complex Design Tasks?” Submitted to: Journal of Usability Studies, Special Issue on “New Frontiers in Usability for Users´ Complex Knowledge Work and Collaborations.” Editors: Barbara Mirel and Mike Albers.

C. C. Hayes and U. Ravinder, “Weasel: A User Guided Enemy Course of Action Generator,” submitted to Journal of Cognitive Engineering and Decision Making, published by the Human Factors and Ergonomics Society (HFES).

F. Akhavi and C. C. Hayes, “Assisting Decision Making in Engineering Design Tasks: Non-deterministic vs Deterministic Approaches,” submitted to Journal of Cognitive Engineering and Decision Making, published by the Human Factors and Ergonomics Society (HFES).

C. C. Hayes, M. Dorneich, G. Mark, L. Meshkat, J. Wesner, R. Wheeler, “Design for Lifecycle, Current Issues and Future Directions,” submitted to Journal Computers and Information in Science and Engineering (CISE).

J. Miller and C.C. Hayes, “Steamer: A Steam Distribution Network Modification Design Tool,” accepted in Journal of Applied Intelligence (forthcoming).

C.C. Hayes, N. Tu, H. Ergan, L. Lu, P. Asaro and P. Jones, “Model-Based Design of Decision Support for Real Time Information Assessment,” accepted in IEEE Transactions on Systems, Man and Cybernetics (forthcoming).

J. Corney, C. C. Hayes, V. Sundararajan, P. Wright, “The CAD/CAM Interface: A 25-Year Retrospective” American Society of Mechanical Engineers Journal of Computing and Information Science In Engineering, 5(3): 188-197, September, 2005.

D.M. Gaines and C.C. Hayes, “Simultaneous Identification of Planning Sub-goals and Construction of Operator Instantiations for more Flexible Planning,” Journal of Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), special issue on New AI Paradigms for Manufacturing, November (2003.)

C.B. Brodie and C.C. Hayes, “DAISY: A Decision Support Design Methodology for Complex, Experience-Centered Domains,” IEEE Transactions on Systems, Man and Cybernetics, 32(1) pp. 50-71 (2002).

L. Wang, C.C. Hayes, and R. Penner, “Automated Phase Design and Timing Adjustment for Signal Phase Design,” Journal of Applied Intelligence, 15, pp. 41-55 (2001).

P. Asaro, C. Hayes and P. Jones, “CORAVEN: A Cognitive Tool for Intelligence Analysis,” Computer-Science Handbook for Displays - Summary of Findings from the Army Research Lab’s Advanced Displays & Interactive Displays Federated Laboratory, edited by M.S. Vassiliou and T.S. Huang (Rockwell Scientific Company; 2001) Chapter 20, pp. 221-231.

C. Hayes, C. Fiebig-Brodie, R. Winkler and J. Schlabach, “FOX-GA: A Course of Action Generator,” Computer-Science Handbook for Displays - Summary of Findings from the Army Research Lab’s Advanced Displays & Interactive Displays Federated Laboratory, edited by M.S. Vassiliou and T.S. Huang (Rockwell Scientific Company; 2001) Chapter 17, pp. 187-195.

D.M. Gaines and C.C. Hayes, “Custom-Cut: A Customizable Feature Recognizer,” Computer-Aided Design, 31(2), pp. 85-100 (1999).

D.M. Gaines, F. Castaño,. and C.C Hayes, “MEDIATOR: A Resource Adaptive Feature Recognizer that Intertwines Feature Extraction and Manufacturing Analysis,” ASME Journal of Mechanical Design, 121(1), pp. 145-158 (1999).

C.C. Hayes, “Agents in a Nutshell -- A Very Brief Introduction,” IEEE Transactions on Knowledge and Data Engineering, 11(1), pp. 127-132 (1999) invited.

J.L. Schlabach, C.C. Hayes, and D.E. Goldberg, “FOX-GA: A Genetic Algorithm for Generating and Analyzing Battlefield Courses of Action,” Evolutionary Computation, 7(1), pp. 45-68 (1998).

G.W. Tan, C.C. Hayes and M. Shaw, “Concurrent Product Design,” IEEE Potentials, 16(2), pp. 9-12 (1997) invited.

C.C. Hayes and M.I. Parzen, “QUEM: An Achievement Test for Knowledge-Based Systems,” IEEE Transactions on Knowledge and Data Engineering, 9(6), pp. 838-847 (1997).

M.C. Fu, C.C. Hayes and E.W. East, “SEDAR: Expert Critiquing System for Flat and Low-Slope Roof Design and Review,” Journal of Computing in Civil Engineering, 2(1), pp. 60-68 (1997).

C.C. Hayes, “A Study of Solution Quality in Human Expert and Knowledge-Based System Reasoning,” Expertise in Context - Human and Machine, edited by P.J. Feltovich, K.M. Ford and R.R. Hoffman (AAAI Press/The MIT Press; 1997) Chapter 14, pp. 339-362.

C.C. Hayes and D.M. Gaines, “Operator Construction for Re-usable Planners in Complex Practical Domains,” International Journal of Expert Systems, 9(3), pp. 383-408 (1996).

C.C. Hayes, “Plan-Based Manufacturability Analysis and Generation of Shape-Changing Redesign Suggestions,” Journal of Intelligent Manufacturing, 7(2), pp. 121-132 (1996).

G.W. Tan, C.C. Hayes and M. Shaw, “An Intelligent-Agent Framework for Concurrent Product Design and Planning,” IEEE Transactions on Engineering Management, 43(3), pp. 297-306 (1996).

C.C. Hayes, “P3: A Process Planner for Manufacturability Analysis,” IEEE Transactions on Robotics and Automation, 12(2), pp. 220-234, (1996).

C.C. Hayes and H.C. Sun “P3: A Manufacturing Planner that Reasons about Cost-Effective Plans to Achieve Positional Tolerance Specifications,” Advances in Engineering Software, 25, pp. 73-86 (1996).

C.C. Hayes and H.C. Sun, “Using a Manufacturing Constraint Network to Identify Cost-Critical Areas of Designs,” Artificial Intelligence for Engineering Design and Manufacturing, 9, pp. 73-87 (1995).

C.C. Hayes, “Incorporating Special Purpose Resource Design in Planning to Make More Efficient Plans,” Applications of Artificial Intelligence in Manufacturing, edited by A.F. Famili, et al. (AAAI Press/The MIT Press; 1992) Chapter 2, pp. 17-39.

P.K. Wright, P.J. Englert and C.C. Hayes, “Applications of Artificial Intelligence to Part Setup and Workholding in Automated Manufacturing,” Artificial Intelligence in Design, edited by D.T. Pham (Springer Verlag; 1991) Chapter 12, pp. 295-314, 1991.

C. Hayes and P. Wright, “Automating Process Planning: Using Feature Interactions to Guide Search,” Journal of Manufacturing Systems, 8(1), pp. 1-15 (1989).

C. Hayes, “Automated Process Planning System for Prismatic Parts,” Expert Systems - Strategies and Solutions in Manufacturing Design and Planning, edited by A. Kusiak (Society of Manufacturing Engineers, Michigan; 1988) Chapter 5, pp. 151-183, 1988.

P.K. Wright, P.J. Englert and C.C. Hayes, “Applications of Artificial Intelligence to Part Setup and Workholding in Automated Manufacturing,” Artificial Intelligence in Design, edited by D.T. Pham (Springer Verlag; 1991) Chapter 12, pp. 295-314, 1991.

C. Hayes, “Automated Process Planning System for Prismatic Parts,” Expert Systems - Strategies and Solutions in Manufacturing Design and Planning, edited by A. Kusiak (Society of Manufacturing Engineers, Michigan; 1988) Chapter 5, pp. 151-183, 1988.