Heat Transfer Laboratory

Faculty: Dr. Richard J. Goldstein

Some Recent Archival Publications [2011-Current]

  1. “Prediction and correction of sidewall conductance for natural convection in horizontal enclosures”, U. Madanan and R. J. Goldstein, Proceedings of the 16th International Heat Transfer Conference., Beijing, China, Aug. 10-15, 2018 (Accepted)

  2. “Experimental Validation of a Boundary Layer Convective Heat Flux Measurement Technique”, K. S. Kulkarni, U. Madanan, T. W. Simon, R. J. Goldstein, Journal of Heat Transfer, 2018 (Accepted)

  3. “Lateral Edge Effects on the Sherwood Number in Turbulent Flow Over a Flat Plate”, M. E. Taliaferro, F. Fassio, F. Gori, T. W. Simon, R. J. Goldstein, ASME Journal of Heat Transfer 140(2), p 023001(12pp.), Feb. 2018

  4. “The heat / mass transfer analogy for a backward facing step”, R. Mittal, U. Madanan, R.J. Goldstein, International Journal of Heat and Mass Transfer, v 113 C, pp. 411-422 (12 pp.), Oct. 2017

  5. “Experimental validation of heat / mass transfer analogy for two-Dimensional laminar and turbulent boundary layers”, K. S. Kulkarni, U. Madanan, R. Mittal, R. J. Goldstein, International Journal of Heat and Mass Transfer, v 113 C, pp. 84-95 (12 pp.), Oct. 2017

  6. "Modeling and Measurements of Heat/Mass Transfer in a Linear Turbine Cascade", F. Papa, U. Madanan, R. J. Goldstein. ASME Journal of Turbomachinery 139(9), p 091002 (12pp.), Sep. 2017

  7. “Corrections for lateral conduction error in steady state heat transfer measurements”, D. Sarkar, A. Jain, R. J. Goldstein, V. Srinivasan, International Journal of thermal Sciences, v 109, p 413–423, Nov. 2016

  8. “Local heat transfer on a finite width surface with laminar boundary layer Flow”, M. E. Taliaferro, M. Angelino, F. Gori, R.J. Goldstein, Applied Thermal Engineering, v 101, pp. 686-692, May 2016

  9. “Thermal Convection in Porous Media at High Rayleigh Numbers”, D. J. Keene and R. J. Goldstein, ASME Journal of Heat Transfer, v 137(3), p 034503-1-4, Mar. 2015

  10. “Effect of freestream turbulence on recovery factor of a cylindrical temperature probe”, M. Stinson and R. J. Goldstein, Proceedings of the 1st Thermal and Fluids Engineering Summer Conference, New York City, USA, Aug. 2015 

  11. “Effect of swirled leakage flow on end-wall film cooling”, M. Stinson, R. J. Goldstein, T. W. Simon, S. Fujimoto, C. Nakamata, Proceedings of the 15th International Heat Transfer Conference., Kyoto, Japan, Aug. 10-15, 2014

  12. “Three-dimensional vortex flow near the endwall of a short cylinder in crossflow: Uniform-diameter circular cylinder”, S. B. Chen, S. Sanitjai, K. Ghosh, R. J. Goldstein, Applied Thermal Engineering, v 49, p 73-8, 31 Dec. 2012

  13. “Effect of Inlet Skew on Heat/Mass Transfer From a Simulated Turbine Blade”, K. Ghosh and R. J. Goldstein, Journal of Turbomachinery, v 34, n 5, p 051042 (11 pp.), Sept. 2012

  14. “Three-dimensional vortex flow near the endwall of a short cylinder in crossflow: Stepped-diameter circular cylinder”, S. B. Chen, S. Sanitjai, K. Ghosh, R. J. Goldstein, Applied Thermal Engineering, v 40, p 36-47, July 2012

  15. “Film Cooling Effect of Rotor-Stator Purge Flow on Endwall Heat/Mass Transfer”, M. Papa, V. Srinivasan, R. J. Goldstein, Journal of Turbomachinery, v 134, n 4, p 041014 (8 pp.), July 2012

  16. “Numerical simulation of thermal boundary layer profile measurement”, K. S. Kulkarni, S. Han, R. J. Goldstein, Heat and Mass Transfer, v 47, n 8, p 869-77, Aug. 2011

  17. “Effect of Wake-Disturbed Flow on Heat (Mass) Transfer to a Turbine Blade”, S. Olson, S. Sanitjai, K. Ghosh, R.J. Goldstein, Journal of Turbomachinery, v 133, p 011015 (8 pp.), Jan. 2011

 

 

  HomeResearchRecent Publications footer image footer image