University of Minnesota
University of Minnesota: Department of Mechanical Engineering
http://www.me.umn.edu/

Barney Klamecki Publications

O'Hare, P. A. G., J. Johnson, B. Klamecki, M. Mulvihill, and W. N. Hubbard, 1969, "The Enthalpy of Formation of Germanium Tetraflouride," Journal of Chemical Thermodynamics, Vol. 1, pp. 177-181.

Klamecki, B. E. 1976, "Friction Mechanisms in Wood Cutting," Wood Science and Technology, Vol. 10, pp. 209-214.

Klamecki, B. E. 1977, "Operations Research Applied to Noise Control in Sawmills," Forest Products Journal, Vol. 27, pp. 41-46.

Klamecki, B. E. 1977, "Forces in Orthogonal Cutting of Rootwood and Stemwood from a Ponderosa Pine Tree," Forest Products Journal, Vol. 27, pp. 26-27.

Klamecki, B. E. 1978, "Utilizing Solar Energy in the Forest Products Industry," Forest Products Journal, Vol. 28, pp. 14-20.

Klamecki B. E. 1978, "Electrical Effects in Woodcutting Tool Wear," Holz als Roh-und Werk, Vol. 36, pp. 107-110.

Klamecki, B. E. 1978, "Optimization of Veneer Lathe Settings--a Nonlinear Programming Approach," Wood Science, Vol. 10, pp. 220-224.

Klamecki, B. E. 1979, "Discontinuous Chip Formation in Woodcutting--A Catastrophe Theory Description," Wood Science, Vol. 12, pp. 32-37.

Klamecki, B. E. 1979, "A Review of Wood Cutting Tool Wear Literature," Holz als roh-und Werk, Vol. 37, pp. 265-276.

Mohan, G. D., B. E. Klamecki, and C. Tanaka, 1980, "The Influence of Applied Voltage on Cutting Forces in Slow Speed Wood Cutting," Wood Science Technology, Vol. 14, pp. 63-68.

Tsai, G. S. C. and B. E. Klamecki, 1980, "Separation of Abrasive and Electrochemical Tool Wear Mechanisms in Wood Cutting," Wood Science, Vol. 12, pp. 236-242.

Klamecki, B. E. 1980, "Wear--An Entropy Production Model," Wear, Vol. 58, pp. 325-330.

Klamecki, B. E. 1980, "A Thermodynamic Model of Friction," Wear, Vol. 63, pp. 113-120.

Klamecki, B. E. 1980, "The Interaction of Tool Wear Mechanisms in Wood Cutting," Wood Science, Vol. 13, pp. 122-126.

Hyun, J. I. and B. E. Klamecki, 1980, "Measurement of Saw-Teeth Wear by Talysurf," Wood Science and Technology (Korea), Vol. 8, pp. 22-27.

Klamecki, B. E. 1981, "Dependence of Particle Board Cut Edge Roughness on Sawtooth Wear," Forest Products Journal, Vol. 31, pp. 41-43.

Mohan, G. D. and B. E. Klamecki, 1981, "On the Susceptibility of Wood Cutting Tools to Corrosive Wear," Wear, Vol. 74, pp. 85-92.

Klamecki, B. E. 1982, "Energy Dissipation in Sliding," Wear, Vol. 77, pp. 115-128.

Lemaster, R., B. E. Klamecki, and D. A. Dornfeld, 1982, "Acoustic Emission in Slow Speed Wood Cutting," Wood Science, Vol. 15, pp. 150-160.

Klamecki, B. E. 1982, "Catastrophe Theory Models of Chip Formation," ASME Journal of Engineering for Industry, Vol. 104, pp. 369-374.

Klamecki, B. E. 1984, "An Entropy-based Model of Plastic Deformation Energy Dissipation in Sliding," Wear , Vol. 96, pp. 319-329.

Klamecki, B. E. 1984, "Experimental Verification of a Catastrophe Theory Model of Metal Cutting Chip Formation," ASME Journal of Engineering for Industry, Vol. 107, pp. 77-80.

Klamecki, B. E. 1985, "A Catastrophe Theory Description of Stick-Slip Motion in Sliding," Wear, Vol. 101, pp. 325-332.

Klamecki, B. E. 1988, "Process Models for Anticipatory Control of Turning Operations," ASME Journal of Engineering for Industry, Vol. 110, pp. 51-55.

Klamecki, B. E., and S. Kim, 1988, "On the Plane Stress to Plane Strain Transition Across the Shear Zone in Metal Cutting," ASME Journal of Engineering for Industry, Vol. 110, pp. 322-325.

Klamecki, B. E. 1989, "On the Effects of Turning Process Asymmetry on Process Dynamics," ASME Journal of Engineering for Industry, Vol. 111(3), pp. 193-198.

Klamecki, B. E. 1989, "The Information Content of Surface Profiles, Surface Profile Measurements, and Profile Characterizations," Wear, Vol. 130, pp. 289-300.

Klamecki, B.E. and J. Hanchi, 1990, "Wear Process Modeling Based on Acoustic Emission," ASME Journal of Tribology, Vol. 112, pp. 469-476.

Rekow, E. D., A. G. Erdman, D. R. Riley, and B. E. Klamecki, 1991, "CAD/CAM for Dental Restorations - Some of the Curious Challenges," IEEE Transactions on Biomedical Engineering, Vol. 38, pp. 314-318.

Hanchi, J., and B. E. Klamecki, 1991, "Acoustic Emission Monitoring of the Wear Process," Wear, Vol. 145, pp. 1-27.

Li, M., B. E. Klamecki, and K.J. Weinmann, 1992, "SN-Gage and Instrumented Pin: Devices to Measure Shear and Normal Tool Forces in Sheet Metal Forming," Transactions of the North American Manufacturing Research Institution, Vol. 20, pp. 103-109.

Klamecki, B. E. 1995, "Characterization of the Double Sided Polishing Process," Advances in Information Storage Systems, Vol. 6, pp. 177-191.

Kim S. and B. E. Klamecki, 1997, "Milling Cutter Wear Monitoring Using Spindle Shaft Vibration," ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 118-119.

Hao, S., S. Ramalingam and B. E. Klamecki, 1997, "Sheet Metal Forming Process Control Using an Active Drawbead," Transactions of the North American Manufacturing Research Institution, Vol. 25, pp 43-48.

Klamecki, B. E., 1998, "Material Removal Asymmetry in the Double-Sided Polishing Process," Transactions of the North American Manufacturing Research Institution , Vol. 26, pp. 177-182.

Klamecki, B. E., 1998, "Residual Stresses and Workpiece Deformation Due to Polishing: and Plating of Computer Hard Disk Substrates," ASME Journal of Manufacturing Science and Engineering, Vol. 121, pp. 32-40.

Hao, S., Klamecki, B. E. and Ramalingam, S., 1999, "Friction Measurement Apparatus for Sheet Metal Forming," Wear, Vol. 224, pp. 1-7.

Hao, S., Klamecki, B. E. and Ramalingam, S., 1999, "A Transducer for Simultaneously Measuring Forces Normal to and Parallel to Surfaces," ASME Journal of Tribology, Vol. 121, pp. 359-362.

Du, H. and Klamecki, B. E., 1999, "Force Sensors Embedded in Surfaces for Manufacturing and Other Tribological Process Monitoring,” ASME Journal of Manufacturing Science and Engineering, Vol. 121, pp. 739-748.

Klamecki, B. E., 1999, “Bearing Condition Monitoring Using Vibration Measurements and a New Signal Enhancement Technique,” International Journal of Applied Mechanics and Engineering, Vol. 4, pp. 51-56.

Hao, S, Ramalingam, S. and Klamecki, B. E., 2000, “Acoustic Emission Monitoring of Sheet Metal Forming – Characterization of Transducer, Work Material and Process,” Journal of Materials Processing Technology, Vol. 101, pp. 124-136.

Klamecki, B. E., 2001, “Comparison of Material Removal Rate Models and Experimental Results for the Double-Sided Polishing Process,” Journal of Materials Processing Technology, Vol. 109, pp. 248-253.

Bataineh, O., Klamecki, B. E. and Koepke, B. G., 2003, “Effect of Pulsed Magnetic Treatment on Drill Wear,” Journal of Materials Processing Technology, Vol. 134, pp. 190-196.

Klamecki, B. E., 2003, “Residual Stress Reduction by Pulsed Magnetic Treatment,” Journal of Materials Processing Technology, Vol. 141, pp. 385-394.

Klamecki, B. E., 2004, “Enhancement of Low-Level Components of Milling Vibration Signals by Stochastic Resonance,” Journal of Process Mechanical Engineering, Proceedings of the Institution of Mechanical Engineers, Part E, Vol. 218, pp. 33-41.

Pawlak, Z., Klamecki, B. E., Rauckyte, T., Shpenkov, G. P. and Kopkowski, A., 2005, “The Tribochemical and Micellar Aspects of Cutting Fluids,” Tribology International, Vol. 38, pp. 1-4.

Klamecki, B. E., 2005, “Use of Stochastic Resonance for Enhancement of Low Level Vibration Signal Component,” Mechanical Systems and Signal Processing, Vol. 19, pp 223-237

Bataineh, O. M. and Klamecki, B. E., 2005, “Prediction of Local Part-Mold and Ejection Force in Injection Molding,” ASME journal of Manufacturing Science and Engineering, Vol. 127, pp. 598-604.

El Mansouri, M. and Klamecki, B. E., 2006, “Magnetic Field Effects in Machining Processes and on Manufactured Part Mechanical Characteristics,” ASME Journal of Manufacturing Science and Engineering, Vol.128, pp. 136-145.

Bockstedt, J, and Klamecki, B. E., 2007, “Effects of pulsed magnetic field on thrust bearing washer hardness,” Wear, Vol. 262, pp. 1086-1096.

Maciejewski, N. J., Sefkow, R. B. and Klamecki, B.E.,2009, “O-Ring Design Based on Strain Energy Distribution,” ASME Journal of Tribology, Vol. 131, 042202-1 - 042202-10.

Sefkow, R. B. Maciejewski, N. J. and Klamecki, B. E., 2009, “Improving Long-term Performance of O-rings through Material Behavior Design,” ASME Journal of Tribology, Vol. 131, 042203-1 – 042203-9.

Matus, D. A. and Klamecki, B. E., 2012, “Improved elastomeric seal design based on nonhomogeneous material properties,” Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, doi: 10.1177/ 1464420712459139, August 31, 2012.