University of Minnesota
University of Minnesota: Department of Mechanical Engineering
http://www.me.umn.edu/

Particle Calibration Laboratory

Publications 2003 to 2017:

Journal Articles

Alonso C, Raynor PC, Goyal S, Olson BA, Alba A, Davies PR, Torremorell M, “Assessment of air sampling methods and size distribution of virus-laden aerosols in outbreaks in swine and poultry farms,” J Vet Diagn Invest, 29(3):298-304, 2017.

Alonso, C, Olson, B., Goyal, B. Raynor, P. Davies, P. Torremorell, M., “Comparison of two size-differentiating air samplers for detecting airborne swine viruses under experimental conditions,” Aerosols Science and Technology, 51(2): 198-205, 2017.

Marple, V. A., Lundgren, D. and B. A. Olson, “A PM1.0/2.5/10 Trichotomous Virtual Impactor Based Sampler: Design and Applied to Arid Southwest Aerosols Part II: Application to Arid Southwest Aerosols,” KONA Powder and Particle Journal, 31: 2-9, 2014.

Marple, V. A., Olson, B. A., Romey, F., Hudak, G., Geerts, S. M. and D. Lundgren, “Second Generation Micro-Orifice Uniform Deposit Impactor, 120 MOUDI-II: Design, Evaluation and Application to Long-Term Ambient Sampling,” Aerosol Science and Technology, 48(4): 427-433, 2014.

Marple, V. A., Lundgren, D. and B. A. Olson, “A PM1.0/2.5/10 Trichotomous Virtual Impactor Based Sampler Design and Applied to Arid Southwest Aerosols Part 1: Design,” KONA Powder and Particle Journal. 30: 15-21, 2013.

Raynor, P., Ingraham, J., Olson, B., Spangenberger, J., and Dasch, J. and J. D’Arcy, “Assessing Potential Nanoparticle Release during Nanocomposite Shredding Using Direct-Reading Instruments,” Journal of Occupational Environmental Hygiene, 9(1):1-13, 2012.

Kuehn, T. H., Marple, V. A. and B. A. Olson, “Development of a Calibration Reference Device for use with Test Standard ANSI/ASHRAE 52.2-2007 (RP-1466),” HVAC&R Research, 18(4): 812-830, 2012.

Kuehn, T. H., Olson, B. A., Campbell, K. and Hawkinson, A., “Performance Evaluation of Hand Held Airflow Instruments Applied to Commercial Kitchen Exhaust Systems (1376-RP),” ASHRAE Transactions Vol. 117, Part 1, 690-701, 2011.

Kuehn, T. H., Olson, B. A., Ramsey, J. W. and Rocklage, J. M., “Characterization of Cooking Effluent from Seven Commercial Kitchen Appliances and Representative Food Products (1375-RP),” ASHRAE Transactions Vol. 115, Part 1, 360-371, 2009.

Kuehn, T. H., Olson, B. A., Ramsey, J. W., “Grease Particle Emission Characterization from Seven Commercial Kitchen Appliances and Representative Food Products (1375-RP),” ASHRAE Transactions Vol. 115, Part 2, 126-137, 2009.

Marple, V.A. and B.A. Olson, “Good Laboratory Practice as Applied to Aerosol Calibrations,” KONA Powder and Particle Journal, 27: 206-216, 2009.

Schrock, D. W., Olson, B. A., Urness, R. J., Kuehn, T. H. and Breitenfeld, A. L., “A New Standard Method of Test for Determining the Grease Particulate Removal Efficiency of Filter Systems for Kitchen Ventilation,” ASHRAE Transactions, Vol. 112, part 1, 2006.

Marple, V.A., B.A. Olson and K. Santhanakrishnan, “Rapid Check of Cascade Impactor Cut-sizes using a Polydisperse Challenge Aerosol Calibration Method,” Aerosol Science and Technology, 40: 1064-1070, 2006.

Marple, V.A., B.A. Olson, K. Santhanakrishnan and J.P. Mitchell, “Next Generation Pharmaceutical Impactor (A New Impactor for Pharmaceutical Inhaler Testing) – Part III: Extension of Archival Calibration to 15 L/min,” Journal of Aerosol Medicine, Vol. 17, No 4: 335-343, 2004.

Marple, V.A., B.A. Olson, K. Santhanakrishnan and J.P. Mitchell, “Next Generation Pharmaceutical Impactor (A New Impactor for Pharmaceutical Inhaler Testing) – Part II: Archival Calibration,” Journal of Aerosol Medicine, Vol. 16, No 3: 301-324, 2003.