Return
to: U of M Home
|
  |
|
|
|
||
 |
| Mechanical Engineering Home >Info: Useful Links > ProE > size down |
| How to Size Down a Drawing with the Block |
| (Contributed by Ryan Fandrey) My detailed drawing prints were cut off on the top. I found the best way to fix this problem was by changing the plot size. It is done through the interface process: Interface -> Plotter -> Postscript -> Options (not Plot) -> Plot Size (followed by Done/Return). Type .95. Now Plot. Continue in regular fashion. The size will be 95% of the regular size drawing. This allows the entire drawing to fit on one piece of paper. |
|
||||
|